Wine Guardian Humidifier - Manual - Manual (Page 16)

15
Controller Set-Up Instructions
Fig. E (TTW) Fig. F (Ducted)
Fig. G (TTW) Fig. H (Ducted)
Fig. C (TTW) Fig. D (Ducted)
1. Locate the Wine Guardian remote
interface controller within the wine
cellar or proceed to the Wine Guardian
Through-the-Wall (TTW) main control
panel. (Fig. A& Fig. B)
2. Press the mode button and hold it
down for five (5) seconds. The screen
will advance to the set up menu and
"1F" or "Setting #1" will appear on the
screen. (Fig. C & Fig. D)
3. Continue to press the mode button to
advance to setup screen "6 0" or
"Setting # 6" . (Fig. E & Fig. F.)
4. Press the up arrow to advance this
setting to either "2" for Freestanding
Humidifier or"1) for Integrated
Humidifier (mounted at Wine
Guardian Unit. (Fig. G. & Fig. H)
5. Controller setup is complete.
Fig. A (TTW)
Fig. B (Ducted)