Vinten Radamec HS-102P Pan & Tilt Head - Manual (Page 19)

HS-102P pan and tilt head
18
[17] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . HS-102P mounting holes (6)
[18] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Bracket mounting holes (4)
Ceiling mount
1. Attach the ceiling mount (AM-CEIL-102) to a solid structural member using any suitable
combination of the mounting holes [19].
2. Attach the head to the ceiling mount using six screws through the mounting holes [20] and
tighten securely.
Fig. 7 Wall bracket (AM-WBKT-102)
CAUTION!
For installations requiring overhead mounting, the head, camera and
accessories must be fitted with fall arresters that comply with all local
legislative requirements.
CAUTION!
The attachment of the ceiling mount to an overhead grid or other
structure must be capable of supporting the total weight of the head,
camera and accessories and must comply with local legislative
requirements.
[17]
[18]