Vinten Radamec Fusion FH-100 - Manual (Page 10)

vii
Technical Data
Weight............................................................. 24.5 kg (54.0 lbs)
Height to wedge adaptor
mounting face ...............25.7 cm to 36.6 cm (10.1 in. to 14.4 in.)
Height ............................................................. 51.9 cm (20.4 in.)
Length............................................................... 22.5 cm (8.9 in.)
Width............................................................... 40.4 cm (15.9 in.)
Maximum payload................................................. 55 kg (121 lb)
Operating Temperature .......................................... 0° C to 50° C
Motor noise ..................................................................... Minimal
Tilt range ..............................................................................±90°
Pan range ........................................................................... 359°
Angular velocity (max) .............................................. 60°/second
Angular velocity (min)) ............................................. 0.1°/second
Angular acceleration ...................................120°/second/second
Response time ....................................................... 4 x per frame
Accuracy .................................................................3 mins of arc
Repeatability ........................................ 3 minutes of arc or 0.05°
Robotic operation...................................................................Yes
Manual operation ...................................................................Yes
Power consumption peak................................................... 250W
Power input ......................... Autoranging 110-240V AC 50/60Hz
System fuse .......................................................................T6.3A
Physical
Environment
Performance
Electrical
WARNING!
This product has basic insulation only (Class 1).
The product requires an earth connection
Pedestal/tripod fixing ..................................... four-hole flat base
Quickfix base...................................heavy-duty Quickfix adaptor
Direct to Canon or Fujinon broadcast lenses. A range of cables
are available to suit both Canon and Fujinon lenses.
FCC, CE, RoHS compliant
Mounting
Camera Lens Control
Certifications
IMPORTANT NOTE: Technical data is subject to change
without notice. Vinten Radamec reserves the right, without
notice, to make changes in equipment design or performance