Art lite pod 5. operating instructions – Vetter Litepod ART-LP User Manual

Page 8

Page 8/14

ART Lite Pod

Operating instructions

5.1

Assembling the ART Lite Pod

First use the bolts on the head piece to attach the struts to the

non-extendible side as can be seen in Figs 1 + 2. Make sure

that the chamfered side of the strut head faces the outside.

(See marking)

Then fasten the extendible strut ends with the bolts to the

base plate (Fig. 3). While doing so, make sure the eyelets of

the plates and the chamfered side of the strut ends are facing

towards the inside (Fig. 4).

The base plates can be secured against slipping with faste-

ning elements that are suitable for the substrate.

To correspondingly adjust the height of the struts to the de-

ployment situation, extend the struts manually and arrest

them at the desired height using the bolts. The numbering of

the holes helps with the orientation.

Finally, the tripod needs to be secured against slipping/splay-

ing with the provided chain. To accomplish that, lead the

chain through the rings (Fig. 5) and clamp the chain accordin-

gly. After that, hook the chain lock together. (Fig. 6)

Fig. 5

Fig. 1

Fig. 2

Fig. 3

Fig. 4