Vetter SP 16 - Manual (Page 5)

Page 4/15
Description 3.
The VETTER safety cushion consists of a self-erecting hose-equip-
ped load-bearing frame. The supporting structure consists of an
extremely tear-proof and neoprene-coated fabric. The material
used for the external tarpaulins is hardly flammable and does not
disintegrate.
The load-bearing frame will be inflated with air with a maximum
pressure of 0,3 bar when the valve at the compressed-air cylinder
is opened. The safety valve integrated in the cylinder fittings will
prevent over-inflation and an inadmissible pressure increase due
to temperature influences.
The safety cushion will be inflated within 30 sec and erect itself
automatically.
It can only be used after it is fully inflated and erected.
When a load hits the safety cushion, the internal supports will col-
lapse.
After the load has been removed, the load-bearing frame will au-
tomatically re-erect itself and restore its original shape.
It may be possible after several load changes that minute quan-
tities of air can leak through the safety valve. This can be easily
compensated by briefly opening the air valve of the compressed-
air cylinder.
Attention! The position of the safety cushion may change
as a result of the previous jump. It will then have to be re-
aligned/re-arranged.
Technical description 3.1
Top view at the entire appliance
External dimensions, approx. mm 3,500 x 3,500
Height, approx. mm 1,700
Side view of the entire appliance
1 Vent valves
2 Filling adapter
3 Safety valve
3500
3500
Ø1300
mm