Vetter SP 16 - Manual (Page 3)

Page 2/15
VETTER safety cushions must only be used for the rescue
of jumping or falling persons.
The falling height must not exceed 16 m
No jumps for exercising or demonstration purposes.
Important note!
The Safety Cushion must not be inflated with a pressure
container having a valve fitted with an integrated excess
flow valve (EFV).
Preliminary remarks 1.
A prerequisite for the safe use of the VETTER safety cushions is
that these operating instructions and the safety instructions are
strictly observed after they have been carefully read.
Only duly authorized and trained personnel of the fire department
must be commissioned with the use of the safety cushion.
The safety cushion must only be used in case of an emergency for
the rescue of jumping or falling persons.
Jumps for training or demonstration purposes are strict-
ly forbidden!
Only specifically designed falling objects, such as sand bags or
dummies, must be used for training or test purposes.
Any non-compliance with this instruction is a violation of the pre-
ventive measures of the fire departments and will result in the ex-
clusion of any liability. Please note that any non-compliance may
have legal consequences.
The improper application of or any unauthorized modification to
the safety cushion will exclude the liability of the manufacturer for
any resultant damage.
Only perfect and tested safety cushions must be used.
Please make sure that only the original Vetter fittings and valves
are used for filling the safety cushion.