Universal Remote Control (URS) MX-650 - Manual (Page 2)

2
Getting Started
Congratulations!
You’ve purchased one of the most advanced and easy to setup control sys-
tems available. The Omega’s built-in library includes thousands of different
brands and models of remote controls. In most systems, all you have to do
to setup the Omega is enter which brands and models you own. If you
own a component too new to be in the library, the Omega uses advanced
learning technology to quickly set each Omega button, one at at time.
Setting up your Omega to replace all your existing remote controls can be
done in a few minutes. Basic Setup is described on pages 5 to 13.
The Omega’s exciting advanced features automate and customize opera-
tion in many ways. You could use Macro Setup to power on all of your
components and start the show with the press of one button! With the
Omega’s unique Favorite Channel capability, you can tune in a channel
with the press of one button instead of entering the entire channel number.
Any of the button names on the display can be edited as you like. It is best
to delay any Advanced Setup (described on pages 14 to 36) until after you
finish Basic Setup.
Battery Installation
Remove the battery compartment cover by pressing up the cover lock.
Insert four AAA batteries into the battery compartment as shown in the
diagram.
T h e O m e g a
+
+
+
+
-
-
-
-
Table of Contents
Getting Started 2
Button Layout 3
Basic Setup 5
Pre-Programmed Method 5
Learning Method 9
Volume Control Punch Through 12
Advanced Operation 14
Advanced Setup 16
Editing Button Labels 16
Macro Button Setup 19
Favorite Channel Setup 21
Hiding and Adding Pages 23
Erasing 25
Cloning One Omega to Another 26
Recalling Pre-Programmed Settings 27
Utilizing Optional RF Base Stations 28
IR/RF Signal Setting 31
ID # - Setting Base Station Address 33
EMITT - Setting IR Emitter Outputs 34
BLAST - Setting the Front Panel Blaster On or Off 35
Pre-Programmed Code Tables 37
Frequently Asked Questions 59
Warranty 59
Specifications 59