Favorite channel setup – Universal Remote Control (URS) MX-650 User Manual

Page 12

U n i v e r s a l R e m o t e C o n t r o l , I n c .

T h e O m e g a

Note: If a number is repeated when setting the channel (for example,channel
“33” or “522”) it is usually best to set a half second delay in between the
identical numbers by pressing the PAUSE button. Each press of the PAUSE
button increases the delay by a half second.

Press the Channel UP button to SAVE your macro. The screen
returns to the SETUP menu.

Press the MAIN button twice to return to normal operation.

Use the PAUSE Button to set
delays between steps, each press
of the pause button increases the
delay by a half second.

Favorite Channel Setup

Imagine surfing all your favorite channels, without ever typing in a
channel number. By simply setting up each of the favorite channel but-
tons, you can make TV, cable or satellite operation fun and easy. To
setup a Favorite Channel button, follow these steps:

Enter SETUP mode by pressing and holding both MAIN and ENT
for three seconds.

Note: You have 30 seconds for each step, otherwise the Omega will time
out automatically.

Press the FAV display button.

The top of the display will show “FAV”. The bottom of the display
will flash “SELECT”.

Use the PAGE or FAV buttons until you can see the name (i.e., ABC,
CBS, NBC) of the favorite channel you wish to setup.

Press the favorite channel button you wish to setup. The top of the
screen changes to show the channel name. The bottom of the
screen displays “STEP0”, indicating that you have not entered the
channel number yet.

Press either the TV, SAT or CABLE Device button (select the device you
use to enter channel numbers).

Press each of the number buttons for the channel.

Note: Some brands of television (for example: SONY) require an
ENT(Enter) command after the channel numbers for the favorite macro to
work correctly.

FAV

Button