Universal Remote Control (URS) UR3-SR3 - Manual (Page 9)

7
050), then press the [STOP] button. Repeat this
process for the third channel. The [CBL] button will
blink once for each channel entered.
STEP4
Press the [CH
5] button to store the channels that
were selected. The [CBL] button will blink twice to
confirm the storage of commands.
To access the programmed channels, press the
[MACRO] button once. This will bring up the
first channel. Press once again and it will bring
up the second channel. Press again and it will
bring up the third channel.
To erase the Macro programming and return to the
original function:
STEP1
Press the [CBL] button to select the CABLE mode.
STEP2
Press a [MACRO] button and the [OK/SEL] button
simultaneously for 3 seconds. The CBL device
LED will turn on for 20 seconds. The next step
must be performed while the LED is on.
STEP3
Press the [CH
5] button to erase the functions stored
in the button. The CBL device LED will blink twice to
confirm that the memory button has been erased.
H. H. Assigning the Volume and Mute keys to Assigning the Volume and Mute keys to
a Different Device a Different Device
By default, the VOL
5, VOL6 and MUTE keys operate
through your TV. If you would like those keys to operate
those functions on a different device, follow these steps.
STEP1
Press the [OK/SEL] button and [CBL] button
simultaneously for three seconds. The device
LED will turn on for 20 seconds. The next step
must be performed while the LED is on.
STEP2
Press the [VOL
5] button. The device LED will
blink.
STEP3
Press the [DEVICE] button corresponding to the
device that you would like the volume and mute
buttons to control. The device LED will blink
twice to confirm the programming.
Example : If you wish to have the volume and mute keys
operate your Cable Box, press the [CBL]
button in Step3.