Universal Remote Control (URS) UR3-SR3 - Manual (Page 10)

8
I. I. Assigning the Channel keys to a Different Assigning the Channel keys to a Different
Device Device
By default, the CH
5, CH6, NUMERIC and LAST keys operate
through your Cable Box. If you would like those keys to operate
those functions on a different device, follow these steps.
STEP1
Press the [OK/SEL] button and [CBL] button
simultaneously for three seconds. The device
LED will turn on for 20 seconds. The next step
must be performed while the LED is on.
STEP2
Press the [VOL
6] button. The device LED will blink.
STEP3
Press the [TV] button. The device LED will blink
twice to confirm the programming.
*Note : If you wish to have the channel keys operate your
Cable Box, press the [CBL] button instead of the
[TV] button in Step 3.
J. J. Assigning the DV Assigning the DV D D
– –
VOD keys to control VOD keys to control
your DVD your DVD
By default, the REW, Play, FF, Record, Stop and Pause
keys operate VOD (Video On Demand) through your Cable
Box. If you would like those keys to operate those
functions on your DVD, press the PLAY button for 3
seconds until the DVD button lights. To return to your
Cable Box control, press the PLAY key again for 3
seconds until the CBL button lights.
K. K. Low Battery Warning Low Battery Warning
When the battery is low (2.3V-2.0V) and needs to be replaced
with fresh batteries, device LED will blink 2 times in sequence
whenever a [DEVICE] button is pressed to turn on equipment.
L. L. Memory Lock System. Memory Lock System.
This remote control is designed to retain programmed
memory for 10 years — even after batteries are removed
from the remote control.
For additional information about your remote control, go to
www.universalremote.com