Universal Remote Control (URS) MX-980 - Manual (Page 10)

Page 7
MX-980 O
WNERS
M
ANUAL
Displaying the Setup Screens
You can adjust the settings of the MX-980
whenever you like by pressing and holding
both the WATCH and the ENTER button at
the same time for three seconds.If you do
not press any button on the SETUP screen
within 30 seconds, the MX-980 will time out
and automatically return to normal opera-
tion. You can return to normal operation
before that by pressing either the WATCH or
the LISTEN button.
At the same time, press and
hold both the WATCH button
and the ENTER button. When
the SETUP screen appears, you
can release the two buttons.
To adjust one of
the settings, press
either the left or
the right hand
button.