Tycon Power TP-SWxxNC-OUT - Manual (Page 3)

3
Specifications
TECH CORNER
Additional Information you may find useful
1. POE CAPACITY: The upload port of the POE Switch can handle up
to 2A current at the input. If powering via the POE Uplink port make
sure your total load does not exceed 2A or it will affect the proper oper-
ation of the switch.
2. WIRE TERMINAL: If DC power is supplied thru the green wire termi-
nal connector, the current limit is 10A. If DC power is supplied through
the POE uplink port, the voltage will also be available on the wire termi-
nal connector and can be used for other uses.
3. CHANGING VOLTAGE: If you need to change the operation of the
switch from one voltage to another, it can be easily retrofitted just by
using a different DC voltage source.
TP—SW5GNC-OUT TP-SW8NC-OUT
Operating Voltage 12 to 57 VDC
POE Port Current 2A Max
POE Ports 1 Uplink, 4 POE Out 1 Uplink, 7POE Out
Wire Terminal Input
Current
10A Max
Transmission Speed 1000/100/10mb 100/10mb
Self Consumption Pow-
er
<3W <1.5W
Operating Temperature
-20 to +75°C (-4 to
+167°F)
-40 to +85°C (-40 to
+185°F)
Operating Humidity 100% IP65
Case – Color UV Protected ABS—Light Gray