Torbal BT Precision Portable - Manual (Page 43)

- 43 -
20.2. Storing a Tare Value Automatically
1. Place a container on the pan and press the MENU key to enter the main menu.
2. When the option “Tare” is displayed press the T key, and then select the option “Tar Set ” by pressing the
T key once again.
3. The scale will begin to Display tare locations. Locations marked with a dot in the upper left corner of the
LED have a stored tare value assigned. To select a tare location or overwrite a current location press the T
key when a desired location is displayed, and then select the option “Pan ” by press the T key once again.
4. The scale will automatically store the value of the container on the in the selected memory location and
return to the weighing mode with the tare value in use.
0.60
tare tar set
tare 1 PAn