C connection via usb – Torbal AGN100 User Manual
Page 38
- 37 -
8.3.6.1. PC Connection via USB
Once the USB port has been configured, connect the scale to the PC with a Standard A/B USB cable
and follow the “Found New Hardware” configuration wizard as described below.
1. Allow Windows to connect to Windows Update in order to search for software. Select “Yes, this time
only
” and click “Next”. Once driver “FT232R USB UART” has been found, select “Install the
software automatically (Recommended)
” and click “Next.
This manual is related to the following products: