Cingular PPC-6600 User Manual
Page 9
800-472-7373
Panasonic – Duramax, TX310, TX320
Press #7764726#. Press SEND. Scroll down to where it says NAM 1 and press OK. Scroll to
ENTER LEVEL 4. Press YES. Scroll to BUILT IN MONITOR. Press EDIT, CLEAR, 1, OK. Press
BACK, BACK TO LEVEL 1, YES, EXIT, SAVE CHANGES, YES. Signal strength is the top right
number. To get out of test mode, follow the same sequence: EDIT, CLEAR, 0, OK.
Pantech (CDMA Phones Only) PN-210, PN-215, PN-218
Dial ##2773 then press the END key. Security Code: 000000 (six zeros). Hit OK. Signal strength
follows RX level or RX power.
Pantech PN-3200
Press ##27732726, press END key. Scroll down and select DEBUG. The signal strength is the
4th line down. (For example Rx-96).
Samsung A310
Press MENU, 0, *. Enter code, 000000 (six zeros). Choose DEBUG. Signal strength is on the 4th
line, last number.
Samsung A460, 3500, A540
Press MENU, 9, 0, and enter Lock Code, 040793. Select DEBUG SCREEN and press OK. Signal
strength is the 2nd number on the 2nd line down. To exit test mode, turn off phone.
Samsung A500, N400
Press MENU 010. Enter 040793. Select DEBUG SCREEN. Signal strength is the 2nd number on
the 2nd line down. To exit test mode, turn off phone.
Samsung A530
Press MENU, 9, *. Enter Field Service Code, 000000 (six zeros). Select DEBUG SCREEN.
Signal strength is on the line that says T-63 D089, for example, D089 is -89 dBm. To exit, turn
power off.
Samsung A640
Enter ##33284#. The phone asks for a 6 digit security code which you will need to get from
Sprint. After entering it the phone will go into the test mode screen. Your signal strength is on the
Line that says T-xxD0xx. To exit, turn off phone.
Samsung A650, A630, N330
Press MENU, 9, *. Enter Field Service code, 000000 (six zeros). Select DEBUG SCREEN and
press OK. Signal strength is on the 5th line, 2nd number (for example, T-65 D085. This means -
085dBm). The number omits the negative. To exit, turn off phone.
Samsung A620, A660, A860, M300
Enter ##33284 and press OK. Enter Security Code 040793. Select DEBUG SCREEN and press
OK. Signal strength is 2nd number on 2nd line (for example, T-63 D085-5. This means -085dBm).
To exit, turn off phone.
Samsung A670, A570
Press MENU, 7, *. Enter Service Code, 000000 (six zeros). Select DEBUG SCREEN. Signal
strength is on the 1st line. To exit, turn off phone.