Cingular PPC-6600 User Manual
Page 6
800-472-7373
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
Special Instructions for specific phones:
For RAZR V3c, V3m, V3maxx VE, use #073887*.
For KRZR K1m use CLR 073887*
For V323 and V325 W315 use CLR 073887*.
For Spint’sV3m MOTORAZR use ##33284# with security code 040793
For Canadian Telus RAZR use ##33284. This security code is only available from Telus.
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
Default Security Code: 000000 or 12345. Press OK or SELECT. From the menu, select TEST
MODE. From the next screen highlight ENABLED. Press OK or SELECT. The phone will then
return to TEST MODE MENU. Power the phone off and then back on. The signal strength
number will be on the 3rd line down followed by the letters MN/A, H/A or HN/A. To exit, press
MENU followed by the left soft key. This allows you to toggle in and out. For RAZR, KRZR, V325,
V323, press CLR and then the upper left soft key. For newer models such as the E815 and RAZR
it may be necessary to dial a fake phone number to get the signal reading to update.
Motorola KRZR K1 (GSM )
Press CLR 073887* very quickly. Security Code 000000. Highlight “Test Mode” Press OK.
Highlight “Enabled” press OK. The phone will return to the menu. Power the phone off and on
again. Phone will show signal strength on the second line down, last number (Example 67-061B.
-061 is the signal strength). To toggle in and out: Press # and then the upper left key with the dot
on it. To Exit: Follow above instructions and choose “Disabled.”
IMPORTANT: If “Browser Setup” is the only option in the menu, then test mode is not available
on your phone.
Motorola RAZR VE20
From phone main screen: Quickly press #073887* (Enters Programming Code) Display shows:
“Enter Code ******”
Enter Security Code: 000000 (unless you have changed the default) Press “Done” (right soft key)
Display shows: “Programming Menu” Scroll to “Test Mode” OR Press 0 Press “Center Key”
(OK/Select) Display shows: “Test Mode Status” If “Disabled” is selected, scroll to “Enabled” and
Press “Center Key”
(The instruction in some sources to next power-cycle the phone
DOES NOT WORK on the VE20.) Press “Back” Press “Back” Press “Call”
Motorola Q (Verizon)
Enter ##*, then press SEND. Highlight CALL STATUS SCREEN and press OK. Signal strength is
the first number on the 3rd line down. Note: This screen also shows EvDO Data readings. Press
OK and then EXIT to exit.
Motorola Q (Sprint)
In phone mode Enter ##33284#. Select Call Status Screen and press OK. To Exit choose the
EXIT option.
Motorola V551, V555, V557 (GSM phones)
Press Menu 073887* VERY QUICKLY. Security code 000000. Highlight “Test Mode” and press
OK. Highlight “Enabled” and press OK. The phone will return to the menu. Power the phone off
and on. Phone will show signal strength on the second line down, last number. For example, 67-
061B indicates a -061dBm received signal strength. To toggle display on/off press Menu and then
the left softkey. To Exit follow instructions above but chose “Disabled.” Note: If “Browser Setup” is
the only option in the menu then test mode is not available on your phone.