Cingular PPC-6600 - Manual (Page 3)

www.tessco.com 800-472-7373
Kyocera K9, 47, 414, 424, 434, 484, 494, 1135, 2325, 2345, 3225
Press 111111 (six ones). Select OPTIONS and press OK. Select DEBUG and press OK. Enter
field debug code, 111111 or 000000 (six ones or zeros) or 040793. Scroll down to DEBUG
SCREEN and press OK. Scroll to ON and press OK, OK, OK. The signal strength is the first
number on the 1st line. To exit the field test, turn off the phone.
Kyocera KX1 (SoHo), KX2 (Koi), KX16 (Candid), 7135
Press 111111 (six ones). Select OPTIONS. Scroll to SERVICE and press OK. Scroll down to
DEBUG and press OK, Enter 000000 and scroll to DEBUG SCREEN. Press OK(*), select ON
and press OK. Press NEXT. The signal strength is on the 2nd line (for example, Rx: -79). To exit,
press END and follow beginning instructions to * and select OFF.
LG CDMA Alternative instructions for 2007/2008 phones
Press ##7764726XXXX (where XXXX is the model number of your phone) then press SEND. For
example if you have an LG VX5300 the code is ##77647265300 (##PROGRAM5300) then press
SEND. Service Code, 000000 (six zeros). Scroll to FIELD TEST. Press SELECT. Scroll to
SERVICE or SCREEN. Press SELECT. Signal strength is on the line that says Rx Level. On
some newer phones you will want to make a phone call while in test mode to get the numbers to
update. To exit test mode press CLEAR, END or simply turn the phone off. (Note: Some phones
will require that you power the phone off. On others, you will need to take the battery off and put
it back on again.)
LG CDMA Phones Sprint only
Press ##33284# or ##33284, then press the blue OK button. If asked for a password, it is usually
040793 or 000000. Choose DEBUG SCREEN. Signal strength is after Rx Power. Please Note:
Certain newer phones have a special service code that you must get from Sprint. Press CLR to
exit Test Mode or power off.
LG Sprint Touchpoint 1100, 2100, 2200, 5250, 5350, 4NE1, 1010, 1200
Press ##33284. Select SAVE and press OK. Select SERVICE SCREEN and press OK. The
signal strength is on the 9th line down (for example, Rx power: -XX). To exit the test mode, press
END.
LG LX-350, LX-550 Fusic (Sprint)
Enter ##33284#. Select Service Screen from Debug menu. Signal is after Rx power. Press CLR
to exit or power off.
Note: The Fusic has a special service code that you must get from Sprint.
LG 510
Press MENU, 3, 0. Enter Service Code, 000000 (six zeros). Scroll to TEST MODE. Press
SELECT. Scroll to READ RSSI. Press SELECT. To exit test mode, turn off phone.
LG PM-225, PM-325, MM-535, LX5400
Press ##33284# or ##33284 then press the blue OK button. If asked for a password, it is usually
040793 or 000000. Choose DEBUG SCREEN. Signal strength is after RxPower. Press Clear or
power off to get out.