Symtech ETF 3 User Manual
Page 6

6
(9) USED FLUID HOSE (BLACK) Connects to
Output side of a disconnected transmission
cooler line.
(10) USED ATF DRAIN HOSE Connects to
Used Fluid Drain Port.
(11) TRANSPARENT Hose Connectors
Located at end of new and used fluid
hoses act as a sight glass to determine
ATF condition.
(12) NEW ATF TANK Supply new ATF.
(13) USED ATF TANK Collect used ATF.
(14) FEMALE NEW ATF SUPPLY Connect
to Alternative New ATF QUICK
COUPLER Supply source.
(15) BATTERY CABLES Power input
connections. Connect to 12 volt D.C.
automotive type battery only!
(16) QUICK COUPLERS Secures the ETF 3
hoses to the transmission system by
way of the connecting adapters.
NOTE: 4.3
(17) USED FLUID DRAIN PORT Drain
Used ATF.
3. GENERAL OPERATING INSTRUCTIONS
3.1 LOCATING TRANSMISSION OIL COOLER LINES
Look for the Transmission Fluid Cooler Lines entering into and
exiting out of the RADIATOR. Select ONLY One Oil Cooler Line
3.2 SELECTING SUITABLE ADAPTERS
Select suitable adapters for the two disconnected open ends.
3.3 FOLLOW THE STEP BY STEP OPERATING INSTRUCTIONS AS
DESCRIBED IN BASIC EXCHANGE
4. USER MAINTENANCE
4.1 TROUBLESHOOTING PROBLEMS AND SOLUTIONS
If the problem cannot be resolved, or does not appear here, contact your Authorized
Symtech Corporation Distributors.
with
the most convenient location for disconnection. There are now two
open ends to work with: one coming from the transmission and one
going into radiator. See Figure. A
Figure A
8
9
12
13
11
10
14