Symtech ETF 3 - Manual (Page 4)

1. GENERAL INFORMATION
1.1 PACKING LIST
Packaged ETF 3 contains the following:
QUANTITY / PART
(1) Main Chassis
(1) Accessory Carton (INCLUDES)
(2) Rear Wheels
(2) Front Casters
(1) Small Parts Bag for Axel Assembly
(1) Organizer with Adaptors
(2) Intermediate Sight Hoses
(1) Used Fluid Drain Hose
(1) Auxiliary Tank Adaptor Hose
(1) Operation Manual
1.2 ASSEMBLY PROCEDURE
Assemble the ETF 3 Wheel Assembly according to the included instruction sheet.
NOTE: Assembly Illustration Enclosed in Machine
1.3 SAFETY PRECAUTIONS
Please read and study the Operating Manual carefully. Be thoroughly familiar with the
controls and proper use of the ETF 3 prior to operating the machine. Failure to follow
these instructions completely could result in damage to the engine/transmission system
or cause severe personal injury.
Many transmission systems operate under high pressure and high temperature. The
procedures set forth throughout this manual require the disconnection and reconnection
of various cooler lines. ALWAYS KEEP FIRE EXTINGUISHING DEVICE NEARBY
WHEN WORKING WITH ANY FLAMMABLE LIQUID.
1.4 VENTILATE WORK AREA
When choosing a location to perform Transmission services, keep in mind that the area
should be well vented and away from all flammable materials. Avoid breathing harmful
fumes and exhaust.
1.5 CHECK LUBRICATION AND COOLANT LEVELS
Check engine oil level and coolant level. Refill if necessary. DO NOT PERFORM THE
COOLANT FLUSH if ENGINE OIL LEVEL or COOLANT LEVEL is LOW.
1.6 CONNECT/DISCONNECT OF ETF 3 HOSES
USE SAFETY GOGGLES WHEN CONNECTING OR DISCONNECTING ANY COOLER
LINES AND CONNECTIONS TO OR FROM THE TRANSMISSION. Do not smoke or
light matches when working with automatic transmission fluid or chemicals.
1.7 DURING OPERATION