SINGER PIXIE - Manual (Page 20)

20
trouBLesHootinG
ProBLeM ProBLeM Cause aMenDMent
No power or machine
runs slowly
Batteries installed incorrectly;
Batteries are low;
Adaptor power inadequate
Reinstall the batteries making
sure they are correctly inserted;
Use new batteries;
Use compatible adaptor
Skipping stitches
Needle eye not centered;
Needle is bent;
Presser foot is too loose
Remove and re-insert the needle with
the flat side of the needle to the back;
Remove and re-insert a new needle;
Tighten the presser foot
Bobbin thread cannot
be drawn up
Bobbin is empty;
Needle is threaded incorrectly
Replace with full bobbin;
Rethread the needle making
sure it is threaded from front
to back
Thread keeps breaking
Needle is bent;
Needle shank not properly seated;
Thread tension dial or thread guide
are too tight Remove and re-insert new needle;
Remove and re-insert new needle;
Loosen the thread tension to a
setting between 3-5
Stitches too loose
or uneven
Threads are caught;
Upper thread is too loose or
too tight
Rethread the upper thread and bobbin
Needle breaks Needle bent or defective Remove and re-insert new needle
Correct Disposal of This Product
This marking indicates that this product should not be disposed with other household
wastes. To prevent possible harm to the environment or human health for uncontrolled
waste disposal, recycle it responsibly to promote sustainable reuse of material resources.