Seca 645 band_1 - Manual (Page 89)

Operation • 89
English
6. OPERATION
CAUTION!
Bodily injury
Perform a function check as described in the
section entitled "Function check" on page 108
before using the device each time.
6.1 Setting up the scale
Moving the scale
1. Tilt the device until it can move freely on the
casters.
2. Keep the device in this position and move it to the
desired set-up or storage location.
Aligning the scale ATTENTION!
Incorrect measurement due to force shunts
If the scale and housing is in contact with
something, e.g. a towel, weight will not be
measured correctly.
– Set the scale up so that only its foot screws
are in contact with the floor.
1. Place the scale on firm, level surface.