Ring Communications DNA934P - Manual (Page 13)

February 2013 Telephone Dialer with Recorder DNA934P
RECORDED MESSAGES
The recorder has 12 recorded messages:
ID
Message
0 “zero”
1 “one”
2 “two”
3 “three”
4 “four”
5 “five”
6 “six”
7 “seven”
8 “eight”
9 “nine”
10 “this call is from ring communications 57 trade zone drive
you have a call from intercom number”
11 “to accept this call dial one to reject this call hang up”
To listen to a message:
Disconnect Telephone Line.
From a intercom master station dial the extension of the DNA934P.
From the PC enter the command
DNA934P>
P 10
Message number 10 will now be played to the intercom speaker.
To change a message:
Disconnect Telephone Line.
From a intercom master station dial the extension of the DNA934P.
From the PC enter the command.
DNA934P>
R 10
Speak the new message to the microphone of the intercom station, then hit enter to stop the
recording.
Page 13
Ring-Master