Pridiom Cassettes PCM183HX Installation Manual - Manual (Page 15)

14
installation manual
6.5 Moving and installation
Fig.6-15
All the figures in this manual are for explanation
purpose only. They may be slightly different from the
heat pump you purchased.The actual unit shall prevail.
Since the gravity center of the unit is not at its physical
center, so please be careful when lifting it with a sling.
Never hold the inlet of the outdoor unit to prevent it from
deforming.
Do not touch the fan with hands or other objects.
Do not lean it more than 45, and do not lay it sidelong.
Make concrete foundation accoding to the sepecifications of
the outdoor units.
Fasten the feet of this unit with bolts firmly to prevent it from
collapsing in case of earthquake or strong wind.(Refer to
Fig.6-15)
NOTE
≥60cm
Fix with bolt
6.4 Available configuration
NOTE
Four different configuration are available for oudoor unit only
changing the panels and fan position.
Keep in mind that fan unit weight is aprox 30kg ,the unit as
well as relevant equipment covered with the vinyl cover
during installation work.
To change air inlet is only necessary to interchange the
indicated panels position. Both panels use screws to be fixed
to unit chas s is.
To change air outlet is necessary to interchange panels too.
Fan outlet panel is attached to fan structure, which must be
mounted as follow .
Air inlet modification
Change Panel
Fig6-13
Fig.6-14
All the figures in this manual are for explanation
purpose only. They may be slightly different from the heat
The actual unit shall prevail.
NOTE
Fig.6-12
m m 0 0 3 ≥
m
m 0 0 4 ≥
m
m 0 0 3 ≥
b)In case that installing on the floor
pump you purchased.