Pridiom Solar Series Installation Manual User Manual
Page 23
Use only connector special designed for solar electric systems.
Use the recommended or specified tools when install the connectors.
Do not unplug the connectors when the power is on.
The connector suitable for the solar photovoltaic system can obtain from the manufacturer.
If you want to use the connector purchased by yourself, the following requirements must be complied:
Electrical connection:
Grounding:
Junction box installation:
Completely cover the module with an opaque material during mechanical installation and electrical
installation.
Protect the cables from being damaged.
Ground mounting must abide with all local regulations.
Storage battery can not be connected with the solar photovoltaic system.
The module frame must be properly grounded. The grounding wire must be properly fastened to
the module frame to assure good electrical contact.
If the support frame is made of metal, the surface of the frame must be electroplated and have
excellent conductivity. The grounding wire must be properly fastened to the support frame .
There are two pre-drilled mounting holes in the frame, used to install the grounding cable. Each
module should connect with the grounding cable.
We recommend the closed lug when grounding. First insert the ground cable into the jack of the
closed lug and weld, then insert the stainless steel bolt (M3) into the tab of the lug, the grounding
hole on the frame and finally a nut to secure the entire assembly. The springwasher is required in
order to prevent screw loosening and cause improper grounding.
The grounding resistance must be less than 10 ohms.
All modules come with a permanently attached junction boxand provide with fitted cables.
The junction box do not need the customer to install,please contact the manufacturer if there is
any problem with th e module.
22
ELECTRICAL WORK
Disclaimer of liability
Because the use of this manual and the conditions or m ethods of installat ion, operation, use
and maintenance of photovoltaic(P V) product ar e beyond our contr ol, we do not take any
reponsibility and expressly disclaims liability for loss,damage, or expense arising out of or in
any way connected with such installation, operation, use or maintenance. No resposibility is
assumed by us for any infringement of patents or other rights of third parties, which may resulted
by using the PV product. No license is granted by modification or otherwise under any patent or
patent rights. The information in this manual is based on com pany s knowledge and experience
and is believed to be reliable; but such information including product specification(without
limitations) and s uggestions do not constitute a warranty, expressed or implied. We reserves
the right to change the manual, the PV product, the specifications, or product data sheets
without prior notice.
,
Fig.58
PDF created with pdfFactory Pro trial versi