Clarion DXZ378RMP - Manual (Page 33)

Digital Radio / DAB Operations
English
33
DXZ378RMP/DXZ379RMP
Recalling a preset programme
1. Press the [ SRC ] button to select the DAB
mode.
2. Press the [ BND ] button. Each time you press
the [ BND ] button, the display changes in the
following order:
[M1] ➜ [M2] ➜ [M3] ➜ [M1]...
3. Press one of the [ DIRECT ] buttons or the
[ w ] / [ z ] button to recall a preset
programme.
Note:
• Press and hold the [ DIRECT ] button for 2
seconds or longer to store the programme
currently being received. (Manual memory)
INFO (Announcement)
In the INFO standby mode, when the selected
announcement programme starts, the main unit
switches to the selected announcement
programme automatically.
● Setting the INFO standby mode
If you press and hold the [ TA ] button for 1
second or longer, “ INFO ” lights in the display
and the main unit is set into the INFO standby
mode until the selected announcement is
broadcast. When the selected announcement
broadcast starts, the announcement item
appears in the display. If you press and hold the
[
TA ] button for 1 second or longer while the
selected announcement broadcast is being
received, the selected announcement broadcast
reception is cancelled and the main unit goes
into the INFO standby mode.
● Cancelling INFO standby mode
To cancel the INFO standby mode, press and
hold the [
TA ] button for 1 second or longer.
● Information select
This is a function for selecting INFORMATION
ON or OFF in the Information interrupt mode.
You can set ON up to 6 information items.
You can select any of the 6 items below:
1. Perform the following operation depending
on the connected model.
Press and hold the [ DISP ] button for 1
second or longer to switch to the RDS
adjustment selection display.
2. Press the [ x ] or [ v ] button to select
“ INFO SELECT ”, then press the [ ] button
to enter “ INFO SELECT ” mode.
3. Press the [ x ] or [ v ] button to select an
information item. You can select any of 6
items:
Travel c ➜ Warning a ➜ News c ➜ Weather a
➜ Event a ➜ Special a ➜ Travel c ➜ ...
4. Press the [ w ] or [ z ] button to set the
information item for ON or OFF.
5. Press the [ ] button to return to the
previous mode.
6. Press the [ DISP ] button to return to the
previous display.
INFORMATION item
ENGLISH e Contents A
Travel c Transport flash
Warning a Warning / Service
News c News flash
Weather a Area weather flash
Event a Event announcement
Special a Special event
DXZ378RMP_EN.book 33 ページ ２００６年１１月２７日 月曜日 午後２時２２分