Clarion DXZ378RMP - Manual (Page 26)

Operations Common to Each Mode
English
26
DXZ378RMP/DXZ379RMP
● Performing a system check
This function allows you to perform a system
check from the adjust mode when required.
2-1. Select “ SYSTEM CHECK ”.
3-1. Press and hold the [ ] button for 1
second or longer.
“ SYSTEM CHECK ” appears in the display,
then the unit returns to the previous
operation mode.
Entering titles
Titles up to 10 characters long can be stored in
memory and displayed for CD, CD changer and
TV stations. The number of titles that can be
entered for each mode are as follows.
1. Press the [ SRC ] button to select the mode
you want to enter a title (CD, CD changer or
TV).
2. Select and play a CD in the CD changer or
tune in to a TV station for which you want to
enter the title.
3. Press and hold the [ DISP ] button for 1
second or longer.
4. Press the [ x ] or [ v ] button to select
“ TITLE INPUT ”.
5. Press the [ ] button.
The display switches to the title input display.
6. Press the [ x ] or [ v ] button to move the
cursor.
7. Press the [ BND ] button to select a character
type. Each time you press the [ BND ] button,
the character type changes in the following
order:
Capital letters ➜ Numbers ➜ Symbols ➜
Umlaut ➜ Capital letters…
8. Press the [ w ] or [ z ] button to select the
desired character.
9. Repeat steps 6 to 8 to enter up to 10
characters for the title.
10.Press and hold the [ ] button for 2 seconds
or longer to store the title into memory.
Clearing titles
1. Select and play a CD in the CD changer or
tune in to a TV station for which you want to
clear the title.
2. Press and hold the [ DISP ] button for 1
second or longer.
3. Press the [ x ] or [ v ] button to select
“ TITLE INPUT ”.
4. Press the [ ] button.
The display switches to the title input display.
5. Press and hold the [ BND ] button for 1
second or longer.
All characters in the title disappear.
6. Press and hold the [ ] button for 2 seconds
or longer to store the setting.
AUX function
This system has an external input jack on the
front panel so you can listen to sounds and
music from external devices connected to this
unit.
● Selecting AUX IN sensitivity
Make the following settings to select the
sensitivity when sounds from external devices
connected to this unit are difficult to hear even
after adjusting the volume.
∗
The factory default setting is “ MID ”.
1. Press and hold the [ DISP ] button for 1
second or longer.
2. Select “ AUX SENS ”.
3. Press the [ w ] or [ z ] button to select
“ LOW ”, “ MID ” or “ HIGH ”.
Mode Number of titles
CD mode 50 titles
TV mode 20 titles
CD changer mode Number of titles
DCZ628 connected 100 titles
DXZ378RMP_EN.book 26 ページ ２００６年１１月２７日 月曜日 午後２時２２分