Clarion DXZ378RMP - Manual (Page 32)

English
32
DXZ378RMP/DXZ379RMP
Digital Radio / DAB Operations
DAB control function
When a CeNET cable is used to connect a DAB
(DAH923) (sold separately), all functions can be
operated.
Listening to the DAB station
1. Press the [ SRC ] button to select the DAB
mode.
2. When the unit receives a DAB station, the
display changes in the following order:
Frequency channel ➜ service label
Switching displays
1. Press the [ DISP ] button to select the desired
display.
Notes:
• The number of programmes and broadcasting
times depend on the DAB stations.
• When the strength of DAB signals is weak, audio
output is muted.
Seek tuning
1. Press the [ SRC ] button to select the DAB
mode.
2. Press and hold the [ x ] or [ v ] button for
1 second or longer.
“ DAB ” lights up in the display when the main
unit receives a DAB station.
∗
The main unit stops the seek tuning when it
cannot find a DAB station. The display returns
to the previous mode.
Manual tuning
1. Press the [ SRC ] button to select the DAB
mode.
2. Press and hold the [ BND ] button for 1
second or longer. “ MANU ” lights up in the
display.
3. Press the [ x ] or [ v ] button to select a
station.
∗
If no operation is performed for more than 7
seconds, manual tuning is cancelled and the
display returns to the previous mode.
Switching programmes
1. Press the [ SRC ] button to receive a DAB
station.
2. Press the [ x ] or [ v ] button to switch
programmes in the DAB station.
Note:
• The programme name may be the same
depending on DAB programmes.
Programme scan
This function scans through each receivable
programme in a DAB station being received for
10 seconds sequentially. This is useful when
you want to search for a desired programme.
1. Press the [ SRC ] button to receive a DAB
station.
2. Perform the following operation depending
on the connected model.
Press the [ ] button. “ SRVC SCN ” appears
in the display and the unit starts scanning
each programme for 10 seconds
sequentially. Each time the main unit scans,
the programme name is shown in the
display.
3. To stop programme scan when a desired
programme is tuned in.
Press the [ ] button.
Manual memory
The main unit has a manual memory function
for DAB programmes. Up to 18 programmes (6
programmes each) can be preset in the preset
buttons.
[M1], [M2] and [M3]
1. Press the [ SRC ] button to select the DAB
mode.
2. Press and hold the [ BND ] button for 1
second or longer to select any one shown
above.
3. Press the [ x ] or [ v ] button to select a
desired programme.
4. Press and hold one of the [ DIRECT ] buttons
(1 to 6) for 2 seconds or longer to store the
programme.
Note:
• The interrupt programme (PTY or INFO) cannot
be written into a manual memory.
DXZ378RMP_EN.book 32 ページ ２００６年１１月２７日 月曜日 午後２時２２分