Clarion DXZ378RMP - Manual (Page 21)

CD/MP3/WMA Operations
English
21
DXZ378RMP/DXZ379RMP
Set the type of file to be played
(multi-session function)
When a single disc holds both normal CD type
tracks and MP3/WMA type tracks, use this
command to select which type of track to play.
∗ Default setting is “ MULTI-SESS CD ”.
• When only one type of track (either music CD
or MP3/WMA) is recorded on a disc, selecting
either type will allow playback of the disc.
• When playing CCCD (copy-control CDs), set
to CD type.
1. Press and hold the [ BND ] button for 1
second or longer.
Each time the button is held pressed in this
way, the playback type alternates between
CD type and MP3/WMA type.
• MULTI-SESS CD
When playing music CD only.
• MULTI-SESS MP3
When playing music MP3/WMA only.
2. When setting is completed, remove the disc
and reinsert it.
Backup Eject function
Just pressing the [ Q ] button, ejects the disc
even if the power to the unit was not turned on.
1. Press the [ OPEN ] button to open the FLIP
DOWN PANEL.
Note:
• If the FLIP DOWN PANEL will not open far
enough, open it gently with your hand.
2. Press the [ Q ] button. Remove the disc after
it is ejected.
3. Close the FLIP DOWN PANEL.
Notes:
• Always close the FLIP DOWN PANEL once you
take out the disc.
• If you force a CD into before auto reloading, this
can damage the CD.
• If a CD (12 cm) is left in the ejected position for 15
seconds, the CD is automatically reloaded (Auto
reload).
Listening to a disc already loaded
in the unit
Press the [ SRC ] button to select the CD/MP3/
WMA mode.
When the unit enters the CD/MP3/WMA mode,
play starts automatically.
If there is no disc loaded, the indication “ NO
DISC ” appears in the title display.
The mode changes each time the [ SRC ] button
is pressed. (Modes are not displayed for
equipment that is not connected.)
Radio ➜ (DAB) ➜ CD/MP3/WMA ➜ (iPod BB)
➜ (CD changer) ➜ (DVD changer) ➜ (TV) ➜
AUX ➜ Radio ...
Loading a CD
1. Press the [ OPEN ] button to access the CD
SLOT behind the FLIP DOWN PANEL.
2. Insert a CD into the center of the CD SLOT
with the labeled side facing up. The CD plays
automatically after loading.
Notes:
• Never insert foreign objects into the CD SLOT.
• If the CD is not inserted easily, there may be
another CD in the mechanism or the unit may
require service.
• Discs not bearing the or mark and
CD-ROMs cannot be played by this unit.
• Some CDs recorded in CD-R/CD-RW mode may
not be usable.
3. Close the FLIP DOWN PANEL.
CAUTION
Be careful not to catch your hand or fingers
while closing the FLIP DOWN PANEL.
Notes:
• If the FLIP DOWN PANEL does not open fully,
gently open with your hand.
• After loading a CD, always close the FLIP DOWN
PANEL.
DXZ378RMP_EN.book 21 ページ ２００６年１１月２７日 月曜日 午後２時２２分