Turntable set up – Origin Live Resolution MKI User Manual
Page 3
Page3
Turntable set up
When you unpack the deck, check that you have all items listed in the parts list.
S E T T I N G U P T H E P L I N T H
The spring bolt assembly is fitted as shown in the diagram below (without the serrated washer, spring seat and spring). Fit the serrated washer,
spring seat and spring over the bolt as shown below – the bottom threaded spring adjuster (not needed on latest models of Resolution)
should be rotated anti-clockwise until it moves upward sufficiently to clear and no longer touch the plinth – this important as it reduces
vibration transmitted to the spring.
PHOTO 1
Note
bottom height spring adjuster is not required with newer top spring adjusters - performance is not affected with either
version.