Modern AG 15' Raptor - Manual (Page 53)

15’ Raptorrr - 53
OPERATION SECTION
Shutting Down the Implement
to shut down the implement, first bring the tractor to a complete stop. then slow down the
implement by reducing the engine speed before disengaging the PtO. Wait for all motion to stop
before proceeding to drive or shut down the tractor.
Park the tractor on a level surface, place the transmission in park or neutral and apply the parking
brake, lower the attached implement to the ground, shut down the engine, remove the key, and
wait for all motion to come to a complete stop before exiting the tractor.
DISCONNECTING THE Cutter FROM THE TRACTOR
Before disconnecting the cutter, the PtO must be disengaged and blade rotation at a complete
stop. move the cutter to a level storage location and lower the center section and both wings to the
ground. If the cutter will be stored with the wings in the raised position, install both wing transport
lock braces. If the cutter is not resting securely on the ground, block the cutter up securely before
attempting to disconnect it from the tractor.
use extreme care to keep feet and hands from under the cutter and clear of any pinch points.
always shut the tractor completely down, place the transmission in park, and set the parking brake
before you or anyone else attempts to connect or disconnect the Implement and tractor hitches.
DANGER