Mercedes-Benz CL-Class 2004 Owners Manual User Manual
Page 57
56
Getting started
Parking and locking
For more information, see “Locking and
unlocking” (
୴
page 88).
Turning off the engine with
KEYLESS-GO*
̈
Place the gear selector lever in
position P.
̈
Press the KEYLESS-GO start/stop but-
ton to shut off the engine.
With the driver's door closed, the start-
er switch is now in position 1. With the
driver’s door opened, the starter switch
is set to position 0, same as SmartKey
removed from starter switch
(
୴
page 31).
̈
Press the seat belt release button
(
୴
page 44).
Allow the retractor to completely re-
wind the seat belt by guiding the latch
plate.
Warning!
G
When leaving the vehicle, always remove the
SmartKey from the starter switch and lock
your vehicle. Do not leave children unat-
tended in the vehicle, or with access to an
unlocked vehicle. Unsupervised use of vehi-
cle equipment may cause an accident
and/or serious personal injury.
!
If you hear a warning signal, you have
either
ț
forgotten to turn off the lights be-
fore opening the driver’s door
or
ț
tried to turn off the engine while the
gear selector lever is not in P .
Turn off the lights or place the gear se-
lector lever in P.
i
Opening a door causes the windows on
that side of the car to open slightly.
They will return to the up position when
the door is closed.