Mercedes-Benz CL-Class 2004 Owners Manual User Manual
Page 111
110
Controls in detail
Seats
Placing power head restraints* upright
̈
Make sure the ignition is switched on.
All the lamps in the instrument cluster
come on.
̈
Press switch 1 in the front center con-
sole and hold.
The rear head restraints will fold up-
right.
Folding back and placing upright power
head restraints* with the switch in the
rear center console
You can fold the rear power head restraints
backward or upright using the head re-
straint folding switch in the rear center
console.
1 Fold rear head restraint up
2 Fold rear head restraint down
̈
Make sure the ignition is switched on.
All the lamps in the instrument cluster
comes on.
̈
Push upper half 1 of switch.
The rear power head restraints will fold
upright.
̈
Push lower half 2 of switch.
The rear power head restraints will fold
backward.
Head restraint tilt
You can adjust the angle manually by pull-
ing or pushing the head restraints by hand.
Warning!
G
For safety reasons, always drive with the
rear head restraints in the upright position
when the rear seats are occupied.
Keep the area around head restraints clear
of articles (e.g. clothing) to not obstruct the
folding operation of the head restraints.