Mercedes-Benz CL-Class 2004 Owners Manual User Manual

Page 52

Getting started

Driving

Single wipe

Press switch briefly in the direction of
arrow 1.

The windshield wipers wipe one time
without washer fluid.

Wiping with windshield washer fluid

Press switch in the direction of
arrow 1 past the resistance point.

The windshield wiper operates with
washer fluid.

For information on filling up the washer
reservoir, see “Windshield washer system
and headlamp cleaning system”
(

୴

page 269)

If anything blocks the windshield wip-
ers (leaves, snow, etc.), switch them off
immediately.

For safety reasons,

turn off the engine by turning
the SmartKey to position 0 and
withdraw SmartKey from starter
switch

turn off the engine by pressing
the KEYLESS-GO* start/stop
button and open the driver’s
door (with the driver’s door
open, starter switch is in
position 0, same as with
SmartKey removed from starter
switch)

before attempting to remove any
blockage.

Remove blockage.

Turn the windshield wipers on
again.

If windshield wipers fail to function at
all in switch position I,

set the combination switch to the
next highest wiper speed

have the windshield wipers
checked at the nearest authorized
Mercedes-Benz Center