Mercedes-Benz CL-Class 2004 Owners Manual User Manual
Page 263
262
Operation
Engine compartment
Checking the engine oil level with the
control system
When checking the oil level the vehicle
must
ț
be parked on level ground
ț
be at normal operating temperature
ț
have been stationary for at least five
minutes with the engine turned off
To check the engine oil level via the multi-
function display, do the following:
̈
Turn the SmartKey in the starter switch
to position 2 or press the KEYLESS-GO
start/stop button* twice.
The standard display (
୴
page 134) should
appear in the multifunction display.
̈
Press button
k or j on the
steering wheel until the following mes-
sage is seen in the multifunction dis-
play:
CORRECT MEASUREMENT
ONLY IF VEH. LEVEL
After about three seconds this mes-
sage is displayed:
ENGINE OIL LEVEL
MEASURING NOW!
One of the following messages will sub-
sequently appear in the indicator:
ț
ENGINE OIL LEVEL
OK
ț
ADD 1.0 QT. TO
REACH MAX. OIL LEVEL!
(Canada:
1.0 LITER
)
ț
ADD 1.5 QTS. TO
REACH MAX. OIL LEVEL!
(Canada:
1.5 LITERS
)
ț
ADD 2.0 QTS. TO
REACH MAX. OIL LEVEL!
(Canada:
2.0 LITERS
)
̈
If necessary, add engine oil.
For adding engine oil see (
୴
page 265).
For more information on engine oil, see
“Technical data” section (
୴
page 372) and
(
୴
page 374).
i
If you want to interrupt the checking
procedure, press the
k or j but-
ton on the multifunction steering
wheel.