Mercedes-Benz CL-Class 2005 Owners Manual User Manual
Page 202
200
Controls in detail
Power windows
Fully closing the windows
(Express-close)
̈
Press switch 1 to 4 at the
symbol
j past the resistance point
and release.
The corresponding window closes com-
pletely.
Stopping windows during Express-op-
eration
̈
Briefly press the respective power win-
dow switch again.
Synchronizing the power windows
ț
after the battery has been disconnect-
ed
ț
if the power windows cannot be fully
opened (Express-open) or closed
(Express-close)
Each power window must be synchronized.
̈
Close all doors.
̈
Switch on ignition (
୴
page 34).
̈
Press and hold switch 1 to 4 at the
symbol
j until the windows are
completely closed.
̈
Hold on to switches 1 to 4 for ap-
proximately one second.
The power windows are synchronized.
Warning!
G
Driver's door only:
If within five seconds you again press the
switch past the resistance point and re-
lease, the automatic reversal will not func-
tion.
!
If the upward movement of the window
is blocked during the closing proce-
dure, the window will stop and open
slightly.Remove the obstruction, press
the respective power window switch at
the symbol
j again past the resis-
tance point and release.If the window
still does not close when there is no ob-
struction, press and hold the respec-
tive power window switch at the
symbol
j. The side window will
then close without the obstruction sen-
sor function.