Mercedes-Benz CL-Class 2005 Owners Manual - Manual (Page 125)

123
Controls in detail
Memory function
The memory button and stored position
switch are located on the door.
1 Stored position button
2 Memory button
̈ Switch on ignition ( ୴ page 34).
or
̈ Open the respective door and insert
the SmartKey in the starter switch.
Storing positions into memory
̈ Adjust the seats, steering wheel and
exterior mirrors to the desired position
(
୴ page 37).
̈ Press memory button 2.
̈ Release memory button 2 and push
one of the position buttons 1 within
three seconds.
All the settings are stored with the se-
lected position.
Recalling positions from memory
̈ Press and hold one of the position
buttons 1 until the seat, steering
wheel and exterior mirrors have fully
moved to the stored positions.
i
Releasing the button immediately
stops movement to the stored posi-
tions.
Warning!
G
Do not operate the power seats using the
memory button if the seat backrest is in an
extremely reclined position. Doing so could
cause damage to front or rear seats.
First move seat backrest to an upright posi-
tion.