Mercedes-Benz CL-Class 2005 Owners Manual - Manual (Page 100)

98
Controls in detail
Locking and unlocking
Selective setting
If you frequently travel alone, you may wish
to reprogram the SmartKey with
KEYLESS-GO so when you, grasp the driv-
er’s outside door handle only the driver’s
door and the fuel filler flap unlocks.
̈ Press and hold buttons Œ and ‹
simultaneously for about six seconds
until battery check lamp 5 flashes
twice.
The SmartKey with KEYLESS-GO will
then function as follows:
Unlocking driver’s door and fuel filler
flap
̈ Grasp the driver’s outside door handle.
All turn signal lamps flash once. The
locking knob in the driver's door moves
up. The anti-theft alarm system is dis-
armed.
Global unlocking
̈ Grasp the outside door handle on the
passenger side.
All turn signal lamps flash once. The
locking knobs in the doors move up.
The anti-theft alarm system is dis-
armed.
Global locking
̈ Press lock button at outside door han-
dle (
୴ page 60).
All turn signal lamps flash three times.
The locking knobs in the doors move
down. The anti-theft alarm system is
armed.
Restoring to factory setting
̈ Press and hold buttons Œ and ‹
simultaneously for about six seconds
until battery check lamp 5 flashes
twice.
i
You can also lock the vehicle using the
lock button at trunk lid (
୴ page 99) or,
vehicles with trunk lid opening/closing
system*, KEYLESS-GO locking/closing
switch (
୴ page 107).
!
If you cannot lock or unlock the vehicle
with the SmartKey with KEYLESS-GO,
then the battery of the SmartKey with
KEYLESS-GO is discharged, the
SmartKey with KEYLESS-GO is mal-
functioning or the vehicle battery is
drained.
ț Check the battery of the SmartKey
with KEYLESS-GO and replace them
if necessary (
୴ page 371).
ț Use the mechanical key to unlock
the driver’s door (
୴ page 367) and
the trunk ( ୴ page 368).
ț Use the mechanical key to lock the
driver’s door (
୴ page 367).