Mercedes-Benz C-Sedan OCS 2005 COMAND Manual - Manual (Page 85)

25
At a glance
Menu system
The main area 2 shows messages and
settings.
You can change the settings by operating
the system.
The status bar 3 is divided into three
areas.
Left side:
The current operating mode is indicated. In
this example: Radio
Center:
The status of the current operating mode
or other selectable functions are indicated.
In this example:
ț FM = current waveband
ț 1 = memory location of station,
e.g. “1”
Right side:
General status information is indicated
independent of the operating mode.
In this example:
ț Ready = Telephone* is ready for
operation
ț = Reception strength of the
mobile phone*
Menu functions and submenus
Using the soft keys, functions can be
switched ON or OFF, or submenus can be
called up.
E.g. the radio menu:
ț The FM/AM soft key switches between
FM and AM band.
ț The Scan soft key starts/stops the
channel scan.
i
A maximum of five soft keys may be
displayed on each side of the main area
2.