Mercedes-Benz C-Sedan OCS 2005 COMAND Manual - Manual (Page 189)

129
Navigation
During route guidance
Setting POI Icons displays
You can set which POIs are shown as
symbols on the map.
̈ In the Settings menu, press the Icons
soft key.
The available options are displayed.
̈ Push the joystick to g or G to
select an option.
̈ Press E.
The option is activated _.
ț Standard option:
The map shows the default
symbols.
ț Personal option:
You can determine the symbols
which are displayed. The following
section explains the further
operation.
ț None option:
No symbols are shown on the map.
Setting personal symbol display
̈ After selecting the Personal option,
press the Change soft key.
The list of available symbols is
displayed.
̈ Push the joystick to g or G to
select a list entry.
̈ Press E.
The symbol is activated or deactivated
depending on its previous state. You
may also activate more than one
symbol.
i
You will see the symbols only if the map
scale is in the zoomed in scales.
Altering the map scale (
୴ page 119).
i
The Change soft key becomes
available if the Personal option is
chosen.
Meaning Symbol
Selected Q
Unselected q