Mercedes-Benz C-Sedan OCS 2005 COMAND Manual - Manual (Page 171)

111
Navigation
Destination input
Selecting a destination using the map
̈ Press c.
̈ Push the joystick to H, h, g, G,
F, f.
or
̈ Press the Map soft key, e.g. in the Start
route guidance menu ( ୴ page 115).
The map is shown in full view and
cross-hairs appear.
If soft key displays are hidden:
̈ Press any soft key.
The soft key displays will appear.
Available soft keys
ț POIs soft key:
Spotlight a POI if POIs are on the map
(
୴ page 141).
ț Memory soft key:
Set a memory point and saved it in the
Last destinations memory (
୴ page 99).
ț Display soft key:
The Map view display will appear.
(
୴ page 128).
ț Soft key +:
Enlarge visible map section.
ț Soft key ):
Reduce visible map section.
i
The system automatically places the
cross-hairs on the current destination
address.
i
c was pressed:
If no soft key is selected within approx.
8 seconds, the soft key display will
disappear again.
i
The POIs , Memory and Display soft
keys are available if the Map soft key
was pressed.