Ey, see “starting with the smartkey, See “starting with keyless-go – Mercedes-Benz CLS-Class 2006 Owners Manual User Manual
Page 51
50
Getting started
Driving
Starting with the SmartKey
For information on turning off the engine
with the SmartKey, see “Turning off en-
gine” (
̈
Make sure the gear selector lever is set
to P.
̈
Do not depress the accelerator.
̈
Turn the SmartKey in the starter switch
to position 3 and hold until the engine
starts (
Starting with KEYLESS-GO*
You can start your vehicle without the
SmartKey in the starter switch using the
KEYLESS-GO start/stop button on the
gear selector lever.
For information on turning off the engine
with KEYLESS-GO, see “Locking with
KEYLESS-GO*” (
The SmartKey with KEYLESS-GO must be
located in the vehicle.
KEYLESS-GO start/stop button
1 USA only
2 Canada only
̈
Make sure the gear selector lever is set
to P.
̈
Depress the brake pedal during the
starting procedure. Do not depress
accelerator.
The selector lever lock is released.
̈
Press KEYLESS-GO start/stop
button
1 once.
The engine starts if the SmartKey with
KEYLESS-GO is in the vehicle.
i
You can also use the “touch-start”
function. Turn the SmartKey to
position 3 and release it again immedi-
ately. The engine then starts automati-
cally.
Warning!
G
As long as the SmartKey with KEYLESS-GO
is in your vehicle, the vehicle can be started.
Therefore, never leave children unattended
in the vehicle, as they could otherwise acci-
dentally start the engine.
When leaving the vehicle, always take the
SmartKey with KEYLESS-GO with you and
lock the vehicle. Do not leave children unat-
tended in the vehicle, or with access to an
unlocked vehicle.