Mercedes-Benz CLS-Class 2006 Owners Manual - Manual (Page 158)

157
Controls in detail
Control system
Should the vehicle’s system record any
conditions while driving, the number of
messages will reappear in the multifunc-
tion display when the SmartKey in the
starter switch is turned to position 0 or
removed from the starter switch. Settings menu
In the Settings menu there are two func-
tions:
ț The function To reset: Press reset
button for 3 seconds , with which you
can reset all the settings to the original
factory settings.
ț A collection of submenus with which
you can make individual settings for
your vehicle.
̈ Press button è or ÿ repeatedly
until the Settings menu is seen in the
multifunction display.
Resetting all settings
You can reset all the functions of all sub-
menus to the factory settings.
̈ Press the reset button in the instru-
ment cluster (
୴ page 24) for approxi-
mately 3 seconds.
In the multifunction display you will see
the request to press the reset button
again to confirm.
̈ Press the reset button again.
The functions of all the submenus will
reset to factory settings.
i
The vehicle status message memory
will be cleared when you turn the
SmartKey in the starter switch to
position 1 or 2. You will then only see
high priority messages in the multifunc-
tion display (
୴ page 363).