On, see “factory setting, Formation, see “factory setting – Mercedes-Benz CLS-Class 2006 Owners Manual User Manual
Page 101

100
Controls in detail
Locking and unlocking
Factory setting
Global unlocking
̈
Press button
Œ.
ț
All turn signal lamps flash once.
ț
An acoustic signal sounds once (if
equipped and feature activated).
ț
The locking knobs in the doors
move up.
ț
The anti-theft alarm system is dis-
armed.
The vehicle will lock again automatically
and reactivate the anti-theft alarm system
within approximately 40 seconds of un-
locking if:
ț
neither a door nor the trunk is opened
ț
the SmartKey is not inserted in the
starter switch
ț
the central unlocking switch is not acti-
vated
i
Canada only:
This device complies with RSS-210 of
Industry Canada. Operation is subject
to the following two conditions:
(1) This device may not cause interfer-
ence, and
(2) this device must accept any inter-
ference received, including interfer-
ence that may cause undesired
operation of the device.
Any unauthorized modification to this
device could void the user’s authority
to operate the equipment.
i
The electro-hydraulic brake system is
activated (
i
You can also open and close the power
windows (
page 214) and tilt/sliding
page 219) using the
SmartKey.