Mercedes-Benz CLS-Class 2006 Owners Manual - Manual (Page 132)

131
Controls in detail
Memory function
̄ Memory function
Prior to operating the vehicle, the driver
should check and adjust the seat height,
seat position fore and aft, and seat back-
rest angle if necessary, to ensure adequate
control, reach and comfort. The head re-
straint should also be adjusted for proper
height. See also the section on air bags
(
୴ page 65) for more information on prop-
er seat positioning.
In addition, adjust the steering wheel to
ensure adequate control, reach, operation
and comfort. Both the interior and exterior
rear view mirrors should be adjusted for
adequate rear vision.
Fasten seat belts. Infants and small chil-
dren should be seated in a properly se-
cured restraint system that complies with
U.S. Federal Motor Vehicle Safety Stan-
dards 213 and 225 and Canadian Motor
Vehicle Safety Standards 213 and 210.2.
With the memory function you can store up
to three different settings.
The following settings are stored when
using the buttons on the driver’s door:
ț Driver’s seat, backrest and head
restraint position
ț Settings for multicontour seat*
ț Steering wheel position
ț Exterior rear view mirror position
The following settings are stored when
using the buttons on the front passenger
door:
ț Front passenger seat, backrest and
head restraint position
ț Settings for multicontour seat*
Warning!
G
Do not activate the memory function while
driving. Activating the memory function
while driving could cause the driver to lose
control of the vehicle.