Mercedes-Benz CLS-Class 2006 Owners Manual User Manual
Page 317
316
Operation
Tires and wheels
̈
Switch on the ignition (
Make sure the standard display menu
appears in the multifunction display
(
̈
Press button
k or j repeatedly
until the following message appears in
the multifunction display:
̈
Press button
æ.
The following message will appear in
the multifunction display:
Tire pressure OK now?
If you wish to confirm activation:
̈
Press button
æ.
The following message will appear in
the multifunction display:
Run Flat Indicator
reactivated
After a certain “learning phase”, the Run
Flat Indicator* checks the set pressure val-
ues for all four tires.
If you wish to cancel activation:
̈
Press button
ç.
or
̈
Wait until the message
Tire pressure OK now?
disappears.
Checking tire pressure electronically
with the Advanced Tire Pressure Moni-
toring System* (Advanced TPMS*),
(Canada only)
i
The Advanced Tire Pressure Monitoring
System* (Advanced TPMS) is equipped
with a combination low tire pres-
sure/TPMS malfunction telltale in the
instrument cluster (
Depending on how the telltale illumi-
nates, it indicates a low tire pressure
condition or a malfunction in the TPMS
system itself:
ț
If the telltale illuminates continu-
ously, one or more of your tires is
significantly under-inflated. There is
no malfunction in the TPMS.
ț
If the telltale flashes for 60 seconds
and then stays illuminated, the
TPMS system itself is not operating
properly.