Mercedes-Benz E-Wagon 2006 Owners Manual - Manual (Page 435)

434
Practical hints
Replacing bulbs
Replacing bulbs for front lamps
1 Housing cover for low beam halogen or
Bi-Xenon* headlamp
2 Bulb socket for high beam head-
lamp/high beam flasher bulb
3 Bulb socket for parking and standing
lamp bulb
4 Bulb socket for low beam headlamp
bulb (halogen headlamps only)
5 Bulb socket for turn signal lamp bulb
Before you start to replace a bulb for a
front lamp, do the following first:
̈ Turn the exterior lamp switch to
position
M ( ୴ page 143).
̈ Open the hood ( ୴ page 315).
Low beam bulb (halogen headlamps
only)
̈ Turn housing cover 1 counterclock-
wise and remove it.
̈ Turn bulb socket 4 with the bulb
counterclockwise and remove it.
̈ Pull the bulb out of bulb socket 4.
̈ Press the new bulb gently into bulb
socket
4.
̈ Place bulb socket 5 back into the
lamp and turn it clockwise until it en-
gages.
̈ Align housing cover 1 and turn it
clockwise until it engages.
Warning!
G
Do not remove the cover 1 for the
Bi-Xenon* headlamp. Because of high
voltage in Bi-Xenon* lamps, it is dangerous
to replace the bulb or repair the lamp and its
components. We recommend that you have
such work done by a qualified technician.