Mercedes-Benz E-Wagon 2006 Owners Manual - Manual (Page 268)

267
Controls in detail
Loading
Belt reel
1 Belt reel
2 Mounting element
3 Locking button
̈ Insert two mounting elements 2 into a
cargo rail.
̈ Turn mounting element 2 in the cargo
rail to N.
̈ Insert belt reel 1 into mounting ele-
ment 2.
̈ Turn mounting element 2 in the cargo
rail until it engages in the ‹ posi-
tion.
You should be able to feel the mounting
element engage in the cargo rail.
̈ Press locking button 3 on the belt reel
and pull cargo net out in direction of ar-
row.
̈ Place load between the cargo net and
the side wall of the cargo compart-
ment.
̈ Press locking button 3 on belt reel.
With the other hand, slowly pull net
over load until it is taut.
Telescoping rod
1 Telescoping rod
2 Mounting element
i
The belt reel can be used to tighten
light-weight loads against the side wall
of the cargo compartment, thus secur-
ing them from slipping.
i
The telescoping rod can be used to
tighten the load against the rear seats
so as to secure it from slipping.