Mercedes-Benz SL-Class 2006 Owners Manual - Manual (Page 425)

424
Practical hints
Towing the vehicle
̈ Screw towing eye bolt in to its stop and
tighten with lug wrench.
To reinstall cover:
̈ Fit locking tabs of cover under the low-
er edge of the opening in the bumper.
̈ Apply even pressure on the upper part
of the cover until it snaps into place.
Rear of vehicle
2 Cover on right side of rear bumper
To remove cover:
̈ Insert flat, blunt object as a lever into
upper left or right recess of cover
2.
̈ Loosen cover 2 using the lever.
̈ Fold cover 2 down in direction of ar-
row to reveal the threaded hole for the
towing eye bolt.
The towing eye bolt is supplied with the
tool kit (located in the storage compart-
ment under the trunk floor).
̈ Screw towing eye bolt in to its stop and
tighten with lug wrench.
To reinstall cover:
̈ Fit cover 2 and snap into place.
୴୴