Mercedes-Benz SL-Class 2006 Owners Manual User Manual
Page 276
275
Operation
Engine compartment
One of the following messages will
subsequently appear in the right multi-
function display:
ț
Engine oil level
OK
ț
Add 1.0 qt.
to reach max.
oil level
(Canada:
1.0 l
)
ț
Add 1.5 qts.
to reach max.
oil level
(Canada:
1.5 l
)
ț
Add 2.0 qts.
to reach max.
oil level
(Canada:
2.0 l
)
̈
If necessary, add engine oil.
For adding engine oil, see (
For more information on engine oil, see the
“Technical data” section (
Other display messages
If the SmartKey or the KEYLESS-GO*
start/stop button is not in position 2, the
following message will appear:
Turn ignition on to
measure engine
oil level
̈
Switch on the ignition (
If you see the message:
Observe
waiting time
̈
If the engine is at operating tempera-
ture, wait 5 minutes before repeating
the check procedure.
̈
If the engine is not at operating temper-
ature yet, wait 30 minutes before re-
peating the check procedure.
If you see the message:
Engine oil level
Not when
engine on
̈
Turn off the engine.
̈
If the engine is at operating tempera-
ture, wait 5 minutes before checking
oil.
̈
If the engine is at operating tempera-
ture yet, you must wait 30 minutes be-
fore checking oil.
i
If you want to interrupt the checking
procedure, press the
k or j
button on the multifunction steering
wheel.