Tire labeling – Mercedes-Benz SL-Class 2006 Owners Manual User Manual
Page 301
300
Operation
Tires and wheels
MOExtended system*
The MOExtended system allows you to
continue driving your vehicle even if there
is a total loss of pressure in one or more
tires.
You may only use the MOExtended system
in conjunction with the Run Flat Indicator*
(Canada vehicles) (
page 293) or TPMS
(U.S. vehicles) (
For information on driving in case of pres-
sure loss in one or more tires (emergency
mode), see the “Operation” section
(
Tire labeling
Besides tire name (sales designation) and
manufacturer name, a number of markings
can be found on a tire.
Following are some explanations for the
markings on your vehicle’s tires:
1 Uniform Quality Grading Standards
2 DOT, Tire Identification Number (TIN)
3 Maximum tire load (
4 Maximum tire inflation pressure
5 Manufacturer
6 Tire ply material (
7 Tire size designation, load and speed
rating (
8 Load identification (
9 Tire name
i
For illustration purposes only. Actual
data on tires are specific to each vehi-
cle and may vary from data shown in
above illustration.
For more information, see “Rims and
tires” (